Isolation, characteristics, and poly(butylene adipate-co-terephthalate) (PBAT) degradation mechanism of a marine bacteria Roseibium aggregatum ZY-1.

Marine microorganisms have been reported to degrade microplastics. However, the degradation mechanisms are still poorly understood. In this study, a bacterium Roseibium aggregatum ZY-1 was isolated from seawater, which can degrade poly(butylene adipate-co-terephthalate) (PBAT). The PBAT-PLA(polylactic acid, PLA) films, before and after degradation, were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR), the weight loss rate and water contact angle were measured. The results indicate that ZY-1 colonized on PBAT-PLA film, changed the functional groups and decreased water contact angle of PBAT-PLA film. Moreover, liquid chromatography mass spectrometry (LC-MS) analysis reveales that PBAT was degraded into its oligomers (TB, BTB) and monomers (T, A) during 10 days, and adipic acid (A) could be used as a sole carbon source. The whole genome sequencing analyses illustrate the mechanisms and enzymes such as PETase, carboxylesterases, arylesterase (PpEst) and genes like pobA, pcaBCDFGHIJKT, dcaAEIJK, paaGHJ involved in PBAT degradation. Therefore, the R. aggregatum ZY-1 will be a promising candidate of PBAT degradation.

Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate.

Polylactide/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were compatibilized using dicumyl peroxide (DCP) and poly(ethylene glycol) 600 diacrylate (PEG600DA) through a one-step melt-blending process. The compatibility and performance of these blends were subsequently characterized. The results showed that grafts formed "in situ" effectively improved the compatibility and interfacial adhesion between PLA and PBAT phases. Melt viscosity and elasticity of both the PLA/PBAT/DCP and PLA/PBAT/DCP/PEG600DA blends evinced significant increases. Compared to PLA alone, both cold and melt crystallization abilities of the PLA/PBAT/DCP/PEG600DA blends were enhanced, with crystallinities increasing by 5 % - 10 %. Furthermore, the thermal stability, as well as hydrophobicity and oleophobicity of the compatibilized blends improved. In comparison with PLA, the elongation at break and notched impact strength for the PLA/PBAT/DCP/PEG600DA (60/40/0.1/4) blend achieved increases of 290 % and 44.23 kJ/m2, corresponding to improvements of 279 % and 1457 %, respectively. The toughening effect was substantially influenced by the ductile matrix (either a co-continuous phase or a flexible PBAT matrix) in addition to the strong interfacial adhesion and fine phase domain. These eco-friendly blends exhibit considerable potential for packaging articles and 3D printing products owing to their excellent mechanical properties and enhanced melt rheology.

Extrusion-blown oxidized starch/poly(butylene adipate-co-terephthalate) biodegradable active films with adequate material properties and antimicrobial activities for chilled pork preservation.

Food safety concerns from spoilage and non-degradable packaging risk human health. Progress made in biodegradable plastic films, but limited study on biomass composite films with favorable morphological, mechanical, and inherent antibacterial properties for fresh meat preservation. Herein, we present a versatile packaging film created through the extrusion blowing process, combining oxidized starch (OST) with poly(butylene adipate-co-terephthalate) (PBAT). SEM analysis revealed even distribution of spherical OST particles on film's surface. FTIR spectra revealed new intermolecular hydrogen bonds between OST and PBAT. While combining OST slightly reduced tensile properties, all composite films met the required strength of 16.5 ± 1.39 MPa. Notably, films with 40 % OST showed over 98 % antibacterial rate against Staphylococcus aureus within 2 h. pH wasn't the main cause of bacterial growth inhibition; OST hindered growth by interfering with nutrient absorption and metabolism due to its carboxyl groups. Additionally, OST disrupted bacterial membrane integrity and cytoplasmic membrane potential. Remarkably, the OST/PBAT film excellently preserved chilled fresh pork, maintaining TVB-N level at 12.6 mg/100 g on day 6, microbial count at 105 CFU/g within 6-10 days, and sensory properties for 8 days. It extended pork's shelf life by two days compared to polyethylene film, suggesting an alternative to a synthetic material.

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) films.

The poly(butylene adipate-co-terephthalate) (PBAT)/poly(lactic acid) (PLA) films have been widely used due to their biological degradability and excellent comprehensive properties. However, the reports regarding biodegradable PLA/PBAT films are rather scarce. In this work, systematical investigations of biaxially stretched PLA/PBAT films were performed. Compared with unstretched films, the PLA/PBAT 75/25 films with the stretching ratio of 5 × 1 exhibited an improvement on the crystallinity of PLA from 6 % to 58.6 %. According to 2D-WAXS results, the orientation of the α crystal in the MD increased with the increase of the stretching ratio. The stretched films showed favorable barrier properties. The oxygen permeability (OP) of 2 × 2 PLA/PBAT 75/25 films shows a decrement of 22 % compared with that of the unstretched films. Interestingly, the uniaxially stretched PLA/PBAT 75/25 films exhibits increased surface roughness (Ra) for 3 × 1 film whereas decreased Ra for the 5 × 1 film, which could be related to the phase separation under stretching. The tensile strength in the machine direction (MD) of the PLA/PBAT 75/25 films was improved up to 51.6 MPa for 5 × 1 film, which is 45 % higher than that of unstretched counterpart. The stretched films exhibit excellent mechanical and barrier properties, which could be utilized in packaging industry with high potential.

Starch/poly(butylene adipate-co-terephthalate) blown antimicrobial films based on ε-polylysine hydrochloride and different nanomontmorillonites.

With increasing awareness on environmental protection and food safety, the development of biodegradable antimicrobial packaging materials has been paid growing emphasis. In this work, starch/poly(butylene adipate-co-terephthalate)/ε-polylysine hydrochloride films were prepared by extrusion blowing, and five commercial organically modified nanomontmorillonites (OMMT, including DK1, DK2, DK3, DK4, and DK5) were used as reinforcing agents. Intercalated structures were formed in the nanocomposite films, especially for those with DK3 and DK4 owing to their higher hydrophobicity and larger interlayer spacing. Adding OMMT weakened hydrogen bonds and the gelatinization/plasticization degree of starch. Morphology analysis revealed that the agglomeration of OMMT occurred in the films, but the film containing DK3 still showed a relatively homogeneous microstructure. Loading OMMT enhanced the strength, deformation resistance, thermal stability, surface hydrophobicity, but decreased barrier properties and water sensitivity of the films. Antimicrobial activity showed that the OMMT and ε-polylysine hydrochloride possessed a synergistic effect against Staphylococcus aureus and Escherichia coli. The maximum inhibition rate was observed in that with DK4, approaching 100 %. Findings supported the application of commercial OMMT in manufacturing biodegradable antimicrobial blown films.

Assessing labelled carbon assimilation from poly butylene adipate-co-terephthalate (PBAT) monomers during thermophilic anaerobic digestion.

PBAT (poly butylene adipate-co-terephthalate) is a widely used biodegradable plastic, but the knowledge about its metabolization in anaerobic environments is very limited. In this study, the anaerobic digester sludge from a municipal wastewater treatment plant was used as inoculum to investigate the biodegradability of PBAT monomers in thermophilic conditions. The research employs a combination of 13C-labelled monomers and proteogenomics to track the labelled carbon and identify the microorganisms involved. A total of 122 labelled peptides of interest were identified for adipic acid (AA) and 1,4-butanedio (BD). Through the time-dependent isotopic enrichment and isotopic profile distributions, Bacteroides, Ichthyobacterium, and Methanosarcina were proven to be directly involved in the metabolization of at least one monomer. This study provides a first insight into the identity and genomic potential of microorganisms responsible for biodegradability of PBAT monomers during anaerobic digestion under thermophilic conditions.

Biodegradable composites from poly(butylene adipate-co-terephthalate) with carbon nanoparticles: Preparation, characterization and performances.

The development of composites for food packaging that have good mechanical and antimicrobial characteristics is still a major challenge. In applications like food packaging, the usage of poly (butylene adipate-co-terephthalate) (PBAT), which has an adversative effect on the environment and reduces petroleum resources, has grown widespread. The present work reveals PBAT composites reinforced with CNPs at a few percentages up to 5.0 wt %. The PBAT/CNPs composites were produced using the solvent casting method. The results of TGA studies, CNPs significantly enhanced the thermal stability of composites using PBAT. The mechanical strength of the PBAT composites was improved by increasing CNPs concentration. Tensile strength increased from 7.38 to 10.22 MPa, respectively. The oxygen transmission rate (OTR) decreased with increasing the CNPs concentrations. The barrier properties (H2O and O2) of PBAT were improved by the presence of CNPs. WVTR was calculated to be 108.6 ± 1.8 g/m2/day for PBAT. WVTR reduced when CNPs concentration in PBAT increased. The PCN-5.0 film sample had the lowest WVTR value, 34.1 ± 3.1 g/m2/day. For PCN-3.0, WVTR dropped by 45.39%, indicating and even with a 3.0 wt% loading of CNPs in PBAT, the rise is noticeable. Contact angle measurements indicate that PBAT/CNPs composites becomes hydrophobic after reinforcing. Gram-positive (S. aureus) and Gram-negative (E. coli) food-borne pathogenic microorganisms showed enhanced antimicrobial activity against the developed PBAT composites. The carrot pieces preserved their freshness for an extended period of 12 days while packaged in the PBAT/CNPs composite film, indicating that the film is an effective and excellent packaging for food materials.

Development of poly(butylene adipate-co-butylene succinate-co-ethylene adipate-co-ethylene succinate) (PBEAS) net twine as biodegradable fishing gear.

Nylon fishing nets have excellent strength and durability, but when lost at sea, their insufficient decomposition destroys habitats and spawning grounds, and pollutes the marine environment. This led to the development of poly(butylene succinate) (PBS) resin for biodegradable fishing gear based on aliphatic fibers. Prompted by the low stiffness and elastic recovery of PBS, we introduced two additional components into the molecular structure of PBS: adipic acid and ethylene glycol. These two new components were combined with succinic acid and 1,4-butanediol, the existing components of PBS, to synthesize poly(butylene adipate-co-butylene succinate-co-ethylene adipate-co-ethylene succinate) (PBEAS) resin via esterification and polycondensation reactions of a quaternary aliphatic copolyester. Although the molecular weight and molecular weight distribution of PBEAS are similar to those of PBS, it has excellent tensile strength, stiffness, elastic recovery, and biodegradability, with a low melting point for good production efficiency. These improvements are expected to allow PBEAS resin to be applied to gill nets for fish that require high stiffness, thereby expanding the use of biodegradable fishing gear.

Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications.

Sustainably derived poly(glycerol adipate) (PGA) has been deemed to deliver all the desirable features expected in a polymeric scaffold for drug-delivery, including biodegradability, biocompatibility, self-assembly into nanoparticles (NPs) and a functionalisable pendant group. Despite showing these advantages over commercial alkyl polyesters, PGA suffers from a series of key drawbacks caused by poor amphiphilic balance. This leads to weak drug-polymer interactions and subsequent low drug-loading in NPs, as well as low NPs stability. To overcome this, in the present work, we applied a more significant variation of the polyester backbone while maintaining mild and sustainable polymerisation conditions. We have investigated the effect of the variation of both hydrophilic and hydrophobic segments upon physical properties and drug interactions as well as self-assembly and NPs stability. For the first time we have replaced glycerol with the more hydrophilic diglycerol, as well as adjusting the final amphiphilic balance of the polyester repetitive units by incorporating the more hydrophobic 1,6-n-hexanediol (Hex). The properties of the novel poly(diglycerol adipate) (PDGA) variants have been compared against known polyglycerol-based polyesters. Interestingly, while the bare PDGA showed improved water solubility and diminished self-assembling ability, the Hex variation demonstrated enhanced features as a nanocarrier. In this regard, PDGAHex NPs were tested for their stability in different environments and for their ability to encode enhanced drug loading. Moreover, the novel materials have shown good biocompatibility in both in vitro and in vivo (whole organism) experiments.

Degradation of poly(butylene adipate-co-terephthalate) films by Thermobifida fusca FXJ-1 isolated from compost.

In recent years, Poly(butylene adipate-co-terephthalate) (PBAT) films were wildly used due to its biodegradable properties. However, there are few reports of strains that can high efficiently degrade PBAT. Thermobifida fusca FXJ-1, a thermophilic actinomycete, was screened and identified from compost. FXJ-1 can efficiently degrade PBAT at 55 °C in MSM medium. The degradation rates of the pure PBAT film (PF), PBAT film used for mulching on agricultural fields (PAF), and PBAT-PLA-ST film (PPSF) were 82.87 ± 1.01%, 87.83 ± 2.00% and 52.53 ± 0.54%, respectively, after nine days of incubation in MSM medium. Cracking areas were monitored uniformly distributed on the surfaces of three kinds of PBAT-based films after treatment with FXJ-1 using scanning electron microscopy. The LC-MS results showed that PBAT might be degraded into adipic acid, terephthalic acid, butylene adipate, butylene terephthalate and butylene adipate-co-terephthalate, and these products are involved in the cleavage of ester bonds. We also found that amylase produced by FXJ-1 played an important role in the degradation of PPSF. FXJ-1 also showed an efficient PBAT-based films degradation ability in simulating compost environment, which implied its potential application in PBAT and starch-based film degradation by industrial composting.

Novel Poly(butylene adipate-co-terephthalate)-degrading Bacillus sp. JY35 from wastewater sludge and its broad degradation of various bioplastics.

Poly(butylene adipate-co-terephthalate) (PBAT), a bioplastic consisting of aliphatic hydrocarbons and aromatic hydrocarbons, was developed to overcome the shortcomings of aliphatic and aromatic polyesters. Many studies report the use of PBAT as a blending material for improving properties of other bioplastics. However, there are few studies on microorganisms that degrade PBAT. We found six kinds of PBAT-degrading microorganisms from various soils. Among these, Bacillus sp. JY35 showed superior PBAT degradability and robustness to temperature. We monitored the degradation of PBAT films by Bacillus sp. JY35 using scanning electron microscopy, field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatography. GC-MS was used to measure the PBAT film degradation rate at different temperatures and with additional NaCl and carbon sources. Certain additional carbon sources improve the growth of Bacillus sp. JY35. However, this did not increase PBAT film degradation. Time-dependent PBAT film degradation rates were measured during three weeks of cultivation, after which the strain achieved almost 50% degradation. Additionally, various bioplastics were applied to solid cultures to confirm the biodegradation range of Bacillus sp. JY35, which can degrade not only PBAT but also PBS, PCL, PLA, PHB, P(3HB-co-4HB), P(3HB-co-3HV), P(3HB-co-3HHx), and P(3HB-co-3HV-co-3HHx), suggesting its usability as a superior bioplastic degrader.

TEMPO/TCC as a Chemo Selective Alternative for the Oxidation of Hyaluronic Acid.

Hyaluronic acid (HA)-based hydrogels are very commonly applied as cell carriers for different approaches in regenerative medicine. HA itself is a well-studied biomolecule that originates from the physiological extracellular matrix (ECM) of mammalians and, due to its acidic polysaccharide structure, offers many different possibilities for suitable chemical modifications which are necessary to control, for example, network formation. Most of these chemical modifications are performed using the free acid function of the polymer and, additionally, lead to an undesirable breakdown of the biopolymer's backbone. An alternative modification of the vicinal diol of the glucuronic acid is oxidation with sodium periodate to generate dialdehydes via a ring opening mechanism that can subsequently be further modified or crosslinked via Schiff base chemistry. Since this oxidation causes a structural destruction of the polysaccharide backbone, it was our intention to study a novel synthesis protocol frequently applied to selectively oxidize the C6 hydroxyl group of saccharides. On the basis of this TEMPO/TCC oxidation, we studied an alternative hydrogel platform based on oxidized HA crosslinked using adipic acid dihydrazide as the crosslinker.

Ecotoxicity of the Adipate Plasticizers: Influence of the Structure of the Alcohol Substituent.

A significant increase in the production of plastic materials and the expansion of their areas of application contributed to the accumulation of a large amount of waste of polymeric materials. Most of the polymer composition is made up of plasticizers. Phthalate plasticizers have been recognized as potentially hazardous to humans and the environment due to the long period of their biodegradation and the formation of persistent toxic metabolites. It is known that the industrial plasticizer dioctyl adipate is characterized by reduced toxicity and a short biodegradation period. The paper describes the synthesis of a number of new asymmetric esters based on adipic acid and ethoxylated butanol by azeotropic esterification. The receipt of the products was confirmed by IR spectra. The physicochemical properties of the synthesized compounds were investigated. The glass transition temperatures of PVC composites plasticized with alkyl butoxyethyl adipates were determined using DSC analysis. The ecological safety of esters was assessed by the phytotesting method. Samples of adipates were tested for fungal resistance, and the process of their biodegradation in soil was also studied. It is shown that the synthesized esters have good plasticizing properties and are environmentally safe. When utilized under natural conditions, they can serve as a potential source of carbon for soil microorganisms and do not form stable toxic metabolites; therefore, they are not able to accumulate in nature; when the plasticizers under study are disposed of in the soil, toxic substances do not enter.

Preparation and Application of Quaternized Chitosan- and AgNPs-Base Synergistic Antibacterial Hydrogel for Burn Wound Healing.

Infection is the major reason that people die from burns; however, traditional medical dressings such as gauze cannot restrain bacterial growth and enhance the healing process. Herein, an organic- and inorganic-base hydrogel with antibacterial activities was designed and prepared to treat burn wounds. Oxidized dextran (ODex) and adipic dihydrazide grafted hyaluronic acid (HA-ADH) were prepared, mixed with quaternized chitosan (HACC) and silver nanoparticles to fabricate Ag@ODex/HA-ADH/HACC hydrogel. The hydrogel, composed of nature biomaterials, has a good cytocompatibility and biodegradability. Moreover, the hydrogel has an excellent antibacterial ability and presents fast healing for burn wounds compared with commercial Ag dressings. The Ag@ODex/HA-ADH/HACC hydrogel will be a promising wound dressing to repair burn wounds and will significantly decrease the possibility of bacterial infection.

Functionalisation of the non-reducing end of chitin by selective periodate oxidation: A new approach to form complex block polysaccharides and water-soluble chitin-based block polymers.

Most polysaccharides used in polysaccharide-based block copolymers are attached to the second block through the reducing end, due to the few and highly polysaccharide specific non-reducing end (NRE) functionalisation methods available. Chitin oligomers, prepared by nitrous acid degradation of chitosan (AnM) can, however, be selectively oxidised by periodate since they only possess a single vicinal diol in the NRE residue. Here, we show that both aldehydes formed after oxidation are highly reactive towards bifunctional oxyamines and hydrazide linkers. Sub-stochiometric amounts of linkers resulted in conjugation of AnM oligomers through both chain termini to yield a discrete distribution of 'polymerised' oligomers. Such chitin-based block polymers were, in contrast to chitins of the same chain lengths, water-soluble. Oxidised AnM oligomers, functionalised at both termini can also enable the preparation of more complex block polysaccharides such as ABA- or ABC-type.

Engineering the Reductive TCA Pathway to Dynamically Regulate the Biosynthesis of Adipic Acid in Escherichia coli.

Adipic acid is a versatile aliphatic dicarboxylic acid. It is applied mainly in the polymerization of nylon-6,6, which accounts for 50.8% of the global consumption market of adipic acid. The microbial production of adipic acid avoids the usage of petroleum resources and the emission of harmful nitrogen oxides that are generated by traditional chemical synthetic approaches. However, in the fermentation process, the low theoretical yield and the usage of expensive inducers hinders the large-scale industrial production of adipic acid. To overcome these challenges, we established an oxygen-dependent dynamic regulation (ODDR) system to control the expression of key genes (sucD, pyc, mdh, and frdABCD) that could be induced to enhance the metabolic flux of the reductive TCA pathway under anaerobic conditions. Coupling of the constitutively expressed adipic acid synthetic pathway not only avoids the use of inducers but also increases the theoretical yield by nearly 50%. After the gene combination and operon structure were optimized, the reaction catalyzed by frdABCD was found to be the rate-limiting step. Further optimizing the relative expression levels of sucD, pyc, and frdABCD improved the titer of adipic acid 41.62-fold compared to the control strain Mad1415, demonstrating the superior performance of our ODDR system.

Adsorption of adipic acid in Al/B-N/P nanocages: DFT investigations.

Drug delivery clusters based on nanocages recently have been the most capable to study. Adipic acid (ADPA) interaction mechanism over nanocages of X(Al/B)12Y(N/P)12 was investigated. We analyzed various electronic, chemical, and spectroscopic properties with nanocages of the adsorbed ADPA molecule. Adsorption energies were calculated to study the adsorption of ADPA with nanocages. Raman enhanced surface scattering is used to track the drug as an effective approach to vibrational spectroscopy. Detection of the drug has been investigated using the SERS properties of nanocages. Title drug acts as a donor of electrons and adsorbs at the electrophilic site of nanocages. Variations in chemical descriptors to recognize the sensing property of ADPA-nanocages are also noted. Analysis of various properties explains enhancement which makes it possible to detect the drug in other products. • Interaction of adipic acid with fullerene-like metal nanocages • Enhancement of spectral properties • Changes in charge transfer values in nanocage-drug system • Docking studies identify the drug delivery property.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass.

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

Helical water-soluble NiII complexes with pyridoxal ligand derivatives: Structural evaluation and interaction with biomacromolecules.

This article deals with the synthesis of Schiff-based bis-azomethine-based ligands derived from pyridoxal and aliphatic dihydrazides and the synthesis of nickel(II) complexes C1-C4. The synthesized complexes had their structures elucidated by monocrystal X-ray diffraction and were characterized by vibrational and absorption spectroscopy. The synthesized ligands have characteristics that allow the formation of self-assembly processes, thus, the flexibility or rigidity of the coordination of organic molecules added to the orbitals of the NiII cation leads to the formation of helical complexes with double helix and a dinucler nickel(II) complex. Moreover, compounds was their interactions with CT-DNA and HSA absorption and emission analysis and molecular docking calculations.

Synergistic effects of sodium adipate/triethylene glycol on the plasticization and retrogradation of corn starch.

Starch retrogradation resulted in bad performance and taste of starch products. In this study, the corn starch films modified by sodium adipate and triethylene glycol were prepared by solution casting. The retrogradation of modified starch films were studied by FT-IR, XRD, SEM, tension test and UV-Vis. The results showed that sodium adipate was more effective than triethylene glycol in inhibiting the short-term retrogradation of starch, and triethylene glycol was more effective than sodium adipate in inhibiting the long-term retrogradation of starch. However, the mixture of sodium adipate and triethylene glycol, especially 15% adipic acid and 10% triethylene glycol, showed synergistic effects on the short-term and long-term retrogradation of starch. The starch film with 15% adipic acid and 10% triethylene glycol had the highest elongation at break, the best transmittance, the lowest change rate of elongation at break, and the lowest moisture content among all the recipes.